How to Clean a Water Dispenser at Home or in the Office (Step by Step)

Posted by

Liwa pure drinking water – Pure Water for a Healthier Tomorrow, Abu Dhabi

Purified water is only as clean as the dispenser it flows through. In Abu Dhabi’s warm indoor air, a reservoir that is never cleaned can develop biofilm and an off taste within a couple of months. Here is the routine we recommend to our customers — it takes about 20 minutes.

How often?

Sanitise the reservoir and taps every 4–6 weeks, clean the drip tray weekly, and wipe the bottle collar and outer surfaces every time you change a bottle.

What you need

  • Clean cloth and a small soft brush
  • 2 tablespoons of unscented household bleach in 4 litres of water or 1 cup of white vinegar in 4 litres
  • A bucket and a jug of fresh water for rinsing

The 6 steps

  1. Unplug and remove the bottle. Wait for the hot tank to cool if your unit heats water.
  2. Drain both taps into a bucket and remove the drip tray.
  3. Wash the reservoir with the sanitising solution, scrubbing the inside walls and the bottle seat with the brush. Let it sit for 5 minutes.
  4. Run the solution through the taps so the tap lines are sanitised too.
  5. Rinse with fresh water 3–4 times until there is no smell of bleach or vinegar.
  6. Wipe the collar where the bottle sits, wipe the neck of the new bottle, load it and plug the unit back in.

Signs your dispenser needs attention

  • Water tastes flat or “plasticky”
  • Slow flow from the taps
  • Slime or discolouration on the bottle seat
  • The unit is more than 3 years old and has never been serviced
Office managers: Liwa includes dispenser servicing in corporate delivery plans — see water dispensers and coolers.

Pair a clean dispenser with sealed, lab-tested bottles: order a 5 gallon refill for 7 AED with free delivery.

Set Up 5 Gallon Delivery

About Liwa Water Team

Liwa Drinking Water & Purification Factory L.L.C – certified pure drinking water delivered across Abu Dhabi since 2000.

Related Posts